Removal Procedure
- Remove the trim panel. Refer to 
Door Trim Panel Replacement 
.
 
- Use a sharp bladed tool in order to separate the water deflector
at the perforations. Refer to
Front Side Door Water Deflector Replacement 
 .
 
- Remove the power door
lock actuator in order to remove the remote lever rod.
 
- Disconnect the power door lock actuator wiring harness.
 
- Use a 6 mm (1/4 in) drill bit in order to remove
the actuator to door    rivets.
 
- Remove the actuator from the door.
 
Installation Procedure
- Install the actuator to the door.
 
Important: Install new plastic retainer clips whenever the lock rods are removed.
- Install the actuator to door rivets.
 
- Connect the power door lock actuator wiring harness.
 
- Install the power door
lock actuator to the remote lever rod.
 
- Install the water deflector. Refer to 
Front Side Door Water Deflector Replacement 
.
 
- Install the trim panel. Refer to 
Door Trim Panel Replacement 
.