Problem  | Action  | 
|---|---|
The adjuster shoes and channels are not properly lubricated.  | Lubricate the carriages and the seat adjuster slides with a lithium base grease.  | 
The adjuster horizontal actuator gear is too tight to the rack gear.  | 
  | 
Problem  | Action  | 
|---|---|
The horizontal actuator is improperly adjusted to the rack gear.  | 
  | 
Problem  | Action  | 
|---|---|
The horizontal drive cable is disconnected or damaged.  | 
  | 
The horizontal actuator is inoperative.  | 
  | 
Problem  | Action  | 
|---|---|
The vertical drive cable is disconnected or damaged.  | 
  | 
The vertical gearnut is inoperative.  | Replace the vertical actuator assembly.  | 
Problem  | Action  | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
One of the following solenoid components is damaged or inoperative: 
 
 
 
 
 
  | Replace the damaged or inoperative solenoid components.  | 
Problem  | Action  | 
|---|---|
There is excessive clearance at the vertical gearnut tension spring.  | Grind down the top of the gearnut shoulder nut 0.40-1.19 mm (1/64-3/64 in) maximum  |