Removal Procedure
- Remove the instrument panel cluster trim plate. Refer to 
Instrument Cluster Trim Panel Replacement 
  in Instrument
Panel, Gages, and Console.
 
- Squeeze the clip fasteners on the sides of the radio and pull
out.
 
- Disconnect the electrical and the antenna connectors.
 
- Remove the radio from
the vehicle.
 
Installation Procedure
- Install the radio to the vehicle.
 
- Connect the electrical and the antenna connectors.
 
- Align the mounting clips
with the slots in the instrument panel and slide into place.
 
- Install the instrument panel cluster trim plate. Refer to 
Instrument Cluster Trim Panel Replacement 
  in Instrument
Panel, Gages, and Console.
 
- Verify component operation.