Park, Tail and Side Marker Lamps Inoperative Domestic
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a fused jumper between CKT 240 (ORN) cavity B to CKT 9 (BRN) cavity H of the headlamp and panel dimmer switch. Do the inoperative lamps light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 240 (ORN) from the headlamp and panel dimmer switch to the instrument panel fuse block. Is the repair complete? | -- | Go to Step 7 | -- |
5 | Replace the headlamp and panel dimmer switch. Refer to Headlamp Switch Replacement . Is the replacement complete? | -- | Go to Step 7 | -- |
6 | Repair the open in CKT 9 (BRN) between the headlamp and panel dimmer switch and the affected lamp(s). Is the repair complete? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
Park, Tail and Side Marker Lamps Inoperative VE1
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did the Lighting Diagnostic System Check bring you here? | -- | Go to Step 2 | |
2 | Check PK LPS Fuse 9 at the I/P Fuse Block. Is the fuse functional? | -- | Go to Step 4 | Go to Step 3 |
3 | Locate overload and replace PK LPS Fuse. Is the repair complete? | -- | Go to Step 9 | -- |
4 |
Does Test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 | Connect a fused Jumper between CKT 240 (ORN) wire cavity H to BRN (9) wire cavity H. Do the park, tail, and side marker lamps operate? | -- | Go to Step 7 | Go to Step 8 |
6 | Locate and repair open in CKT 240 (ORN) wire from Headlamp and panel Dimmer Switch to I/P Fuse Block. Is the Repair complete? | -- | Go to Step 9 | -- |
7 | Replace headlamp and Panel Dimmer Switch. Refer to Headlamp Switch Replacement . Is the Repair complete? | -- | Go to Step 9 | -- |
8 | Locate and repair open in CKT 9 (BRN) wire between Headlamp and Panel Dimmer Switch and S217. Is the repair complete? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
