Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: Check for inoperative bulb before beginning diagnostic procedure. | ||||
1 | Did you perform the Lighting Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Is continuity present? | -- | Go to Step 6 | Go to Step 3 |
3 | Check for continuity in CKT 1200 (LT GRN) in the steering column harness between cavity E11 and the steering column multi-function switch. Is continuity present? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the OPEN in CKT 1200 (LT GRN) in the steering column harness between cavity E11 and the steering column multi-function switch. Is the repair complete? | -- | Go to Step 7 | -- |
5 | Replace the multi-function switch in the steering column Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle Is the repair complete? | -- | Go to Step 7 | -- |
6 | Locate and repair OPEN in CKT 1200 (PNK) between splice S254 and cavity E11 at C201. Is the repair complete? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
