Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: Check for inoperative bulbs before beginning diagnostic procedure. | ||||
1 | Did you perform the Lighting Diagnostic System Check? | -- | Go to Step 2 | |
2 | Check the 15A RH headlamp fuse located in the underhood fuse block. Is the fuse functional? | -- | Go to Step 4 | Go to Step 3 |
3 | Locate possible overload in CKT 312 (TAN/WHT) between the underhood fuse block and the headlamp assembly and replace the fuse. Is the repair complete? | -- | Go to Step 7 | -- |
4 | Check for continuity in CKT 312 (TAN/WHT) between between the underhood fuse block and the headlamp assembly. Is there continuity? | -- | Go to Step 6 | Go to Step 5 |
5 | Locate and repair OPEN in CKT 312 (TAN/WHT) between between the underhood fuse block and the headlamp assembly. Is the repair complete? | -- | Go to Step 7 | -- |
6 | Replace inoperative headlamp assembly Sealed Beam Headlamp Replacement Headlamp Replacement Is the repair complete? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
