GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Avalanche - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Shift Lever Replacement

Removal Procedure
  1. Remove the steering column shroud. Refer to Steering Column Shroud Replacement.
  2. Roll back the shift lever seal on the shift lever until the shift lever bolt is exposed.
  3. Disconnect any electrical connectors as needed.

    4. Object Number: 1700835 Size: SH
  4. Remove the shift lever bolt (2).
  5. Remove the shift lever (1).

Installation Procedure

    Object Number: 1700835 Size: SH
  1. Install the shift lever (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the shift lever bolt (2).

    3. Tighten
    Tighten the bolt to 20 N·m (15 lb ft).

  3. Connect all electrical connectors.
  4. Position the shift lever seal.
  5. Install the steering column shroud. Refer to Steering Column Shroud Replacement.