The New Venture Gear NV 3500 is a 5 speed manual transmission
used on light duty trucks with the 4.3L engine. The NV 3500 is
identified by RPO M50 and RPO MG5. The difference between
the RPO codes is the first speed gear ratios that the transmission has.
The shift assembly design inside the NV 3500 transmission installed
on C/K trucks is different than the NV 3500 transmissions
installed in smaller S/T trucks. The distance between the input
shaft and the countershaft is 85 mm (0.132 in). The transmission
is available in rear wheel drive and four wheel drive.
The transmission has the following features:
| • | Constant mesh helical gearing for reduced noise |
| • | A 2 piece aluminum housing |
| • | Synchronized shifting in all gears |
| • | A shift tower mounted shift lever |
| • | A single rail shift system |
| • | A vehicle speed sensor (VSS) |
The New Venture Gear NV 3500 is a 5 speed manual transmission
used on light duty trucks with the 4.3L engine. The NV 3500 is identified
by RPO M50. The transmission is available in rear wheel drive and four wheel
drive.
The transmission has the following features:
| • | Constant mesh helical gearing for reduced noise |
| • | A two-piece aluminum housing |
| • | Synchronized shifting in all gears |
| • | A shift tower mounted shift lever |
| • | A single rail shift system |
