Headlining Trim Panel Replacement Pickup
                    
Caution: Do not attempt to repair or alter the head impact energy-absorbing material
glued to the headliner or to the garnish trims. If the material is damaged, replace
the headliner and/or the garnish trim. Failure to do so could result in personal injury.
Removal Procedure
- Remove the dome lamp. Refer to 
Dome Lamp Replacement
.
 
- Remove the coat hooks. Refer to 
Coat Hook Replacement
 .
 
- Remove the passenger assist handle. Refer to 
Assist Handle Replacement
 .
 
- Remove the sunshades and the retainers. Refer to 
Sunshade Replacement
 .
 
- Remove the windshield garnish moldings. Refer to 
Windshield Pillar Garnish Molding Replacement
 .
 
- Pull the body side trim panels loose at the roof line.
 
- Use the following steps in order to remove the headliner from the vehicle:
 
| 7.1.  | Grasp the headliner at the front. | 
 
| 7.2.  | Use a downward motion in order to disengage the hook and the loop fasteners at the rear. | 
 
| 7.3.  | Slide the headliner foreword, past the body side trim panels. | 
 
Installation Procedure
- Install the headliner to the vehicle. Pierce the new headliner in order to accommodate actual vehicle accessories.
 
- Secure the body side trim panels at the roof line.
 
- Install the windshield garnish moldings. Refer to 
Windshield Pillar Garnish Molding Replacement
 .
 
- Install the sunshades and the retainers. Refer to 
Sunshade Replacement
 .
 
- Install the passenger assist handle. Refer to 
Assist Handle Replacement
 .
 
- Install the coat hooks. Refer to 
Coat Hook Replacement
 .
 
- Install the dome lamp. Refer to 
Dome Lamp Replacement
.
 
                            Headlining Trim Panel Replacement Utility
                    
Caution: Do not attempt to repair or alter the head impact energy-absorbing material
glued to the headliner or to the garnish trims. If the material is damaged, replace
the headliner and/or the garnish trim. Failure to do so could result in personal injury.
Removal Procedure
- Remove the sunroof console, if equipped. Refer to 
Driver Information Center Replacement
.
 
- Remove the dome lamp. Refer to 
Dome Lamp Replacement
.
 
- Remove the sunroof opening trim, if equipped, by grasping it at the edge and pulling it away from the headliner.
 
- Remove the coat hooks. Refer to 
Coat Hook Replacement
 .
 
- Remove the assist handles. Refer to 
Assist Handle Replacement
 .
 
- Remove the sunshades and the retainers. Refer to 
Sunshade Replacement
 .
 
- Remove the windshield garnish moldings. Refer to 
Windshield Pillar Garnish Molding Replacement
 .
 
- Remove the body lock pillar trim panels (4-door models only). Refer to 
Side Door Lock Pillar Garnish Molding Replacement
 .
 
- Remove the upper seat belt anchor bolts (2-door models only).
 
- Remove the inside air temperature sensor grille.
 
- Remove the body side trim panel. Refer to 
Body Side Trim Panel Replacement
 .
 
- Remove the rear upper garnish molding. Refer to 
Rear Upper Garnish Molding Replacement
 .
 
- Remove the headliner from the vehicle.
 
Installation Procedure
- Install the headliner to the vehicle. New headliners must be pierced in order to accommodate actual vehicle accessories.
 
- Install the rear upper garnish molding. Refer to 
Rear Upper Garnish Molding Replacement
 .
 
- Install the upper body side panel trim. Refer to 
Body Side Trim Panel Replacement
 .
 
- Install the inside air temperature sensor grille.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear seat upper seat belt anchor bolts (2-door models only).
 
Tighten
Tighten the bolts to 70 N·m (52 lb ft).
- Install the body lock pillar trim panels (4-door models only). Refer to 
Side Door Lock Pillar Garnish Molding Replacement
.
 
- Install the windshield garnish moldings. Refer to 
Windshield Pillar Garnish Molding Replacement
 .
 
- Install the sunshades and the retainers. Refer to 
Sunshade Replacement
 .
 
- Install the assist handles. Refer to 
Assist Handle Replacement
 .
 
- Install the coat hooks. Refer to 
Coat Hook Replacement
 .
 
- Install the sunroof opening trim, if equipped, by carefully pressing it into place.
 
- Install the dome lamp, if equipped. Refer to 
Dome Lamp Replacement
.
 
- Install the overhead or sunroof console, if equipped. Refer to 
Driver Information Center Replacement
.