Step  | Action  | Value(s)  | Yes  | No  | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1  | Was the Hydraulic Brake Diagnosis System Check performed?  | --  | ||||||||||||||||
2  | Inspect the disc brake rotors for the following conditions: 
 
 
 
 Refer to the following procedures: 
 
 
 Do any of the above conditions apply?  | --  | ||||||||||||||||
3  | 
 Is the repair complete?  | --  | --  | |||||||||||||||
4  | Inspect the following brake caliper assembly components for corrosion: 
 
 
 
 
 Refer to Brake Caliper Inspection in Disc Brakes. Are any of the above components corroded or sticking?  | --  | ||||||||||||||||
5  | Repair or replace calipers. Refer to the appropriate procedure: 
 
 
 
 Is the repair complete?  | --  | --  | |||||||||||||||
6  | Inspect the disc brake pads and brake shoe linings for the following conditions: 
 
 
 
 
 
 Do any of the above conditions apply?  | --  | ||||||||||||||||
7  | Replace the brake linings. Refer to the appropriate procedure: 
 
 
 Is the repair complete?  | --  | --  | |||||||||||||||
8  | Inspect the brake assembly for loose, missing or broken components. Refer to the appropriate procedure: 
 
 
 Are there missing or loose brake assembly components?  | --  | ||||||||||||||||
9  | Tighten or replace loose or missing brake assembly components. Refer to the appropriate procedure: 
 
 
 Is the repair complete?  | --  | --  | |||||||||||||||
10  | Inspect the hydraulic brake system for leaks. Refer to Brake Fluid Leak . Are there brake fluid leaks?  | --  | ||||||||||||||||
11  | 
 Has the leak returned?  | --  | ||||||||||||||||
12  | Replace the brake hose or pipe as necessary. Refer to the appropriate procedure: Is the repair complete?  | --  | --  | |||||||||||||||
13  | Inspect the brake caliper piston seal for leaks. Is the brake caliper piston seal leaking?  | --  | ||||||||||||||||
14  | Replace the brake caliper piston seal. Refer to the appropriate procedure: 
 
 Is the repair complete?  | --  | --  | |||||||||||||||
15  | Inspect the park brake for improper adjustment. Refer to Park Brake Cable Service/Adjustment or Parking Brake Shoe Adjustment in Park Brake. Is the park brake improperly adjusted?  | --  | ||||||||||||||||
16  | Adjust or replace the park brake cable. Refer to the appropriate procedure: 
 
 
 
 Is the repair complete?  | --  | --  | |||||||||||||||
17  | Inspect for an internal leak within the master cylinder. Refer to Master Cylinder Diagnosis . Is there an internal leak within the master cylinder?  | --  | ||||||||||||||||
18  | Overhaul or replace the master cylinder. Refer to Master Cylinder Overhaul or Master Cylinder Replacement . Is the repair complete?  | --  | --  | |||||||||||||||
19  | Inspect for contaminated or improper brake fluid. Refer to Brake Fluid and Brake Fluid Handling . Is the brake fluid contaminated or improper?  | --  | ||||||||||||||||
20  | Flush the brake system. Refer to Hydraulic Brake System Flushing . Is the repair complete?  | --  | --  | |||||||||||||||
21  | Inspect the brake pipes and hoses for a restricted brake fluid passage. Inspect for the following conditions: 
 
 
 Refer to Hydraulic Brake System Bleeding . Is there a restricted brake fluid passage?  | --  | ||||||||||||||||
22  | 
 Is the repair complete?  | --  | --  | |||||||||||||||
23  | Inspect for air in the brake system. Refer to Hydraulic Brake System Bleeding . Is there air in the brake system?  | --  | ||||||||||||||||
24  | Bleed the brake system. Refer to Hydraulic Brake System Bleeding . Is the repair complete?  | --  | --  | |||||||||||||||
25  | Verify proper brake system operation. Does the brake system operate properly?  | --  | System OK  |