Distributor Driven Gear Can Be Installed in Multiple Positions Notice. Chevrolet Blazer

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2002 🢒 Blazer - 4WD 🢒 Preface 🢒 Cautions and Notices 🢒 Distributor Driven Gear Can Be Installed in Multiple Positions Notice

Notice: The ignition system distributor driven gear and rotor may be installed in multiple positions. In order to avoid mistakes, mark the distributor on the following components in order to ensure the same mounting position upon reassembly:

•	The distributor driven gear

•	The distributor shaft

•	The rotor holes

Installing the driven gear 180 degrees out of alignment, or locating the rotor in the wrong holes, will cause a no-start condition. Premature engine wear or damage may result.