Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | ||
2 | Verify that the license lamps are inoperative. Do the license lamps operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Turn the Multifunction Switch (Headlamp Switch) to the HEAD position. Do the Side Marker Lamps function properly? | -- | Go to Marker Lamps Inoperative | |
4 |
Is the lamp open? | -- | ||
5 | Replace the lamp. Is the repair complete? | -- | -- | |
6 | Connect a test lamp from terminal A to ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||
7 | Inspect TRL PRK LPS fuse in underhood fuse block. Is fuse the good? | -- | ||
8 | Locate and repair CKT 2109 (BRN) for a short to ground. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
9 | Locate and repair CKT 2109 (BRN) for an open or high resistance. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
10 | Locate and repair CKT 1650 (BLK) for an open or high resistance. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
