Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open. | ||||
1 |
Does the test lamp light? | -- | ||
2 | Connect the fused jumper between terminal D and terminal F of the turn/hazard - headlamp switch assembly harness connector. Do the park, marker and tail lamps light? | -- | ||
3 | Repair the open in CKT 240 between the fuse block and the turn/hazard - headlamp switch assembly harness connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
4 | Replace the turn/hazard - headlamp switch assembly. Is the repair complete? | -- | -- | |
5 | Repair the open in CKT 9 between the turn/hazard - headlamp switch assembly and splice (S117 Front lights) (S300 Rear lights). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
