For 1990-2009 cars only
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open. | ||||
1 |
Do the low beam headlamps operate? | -- | Go to Step 2 | Go to Step 3 |
2 | Replace the turn/hazard headlamp switch assembly. Is the repair complete? | -- | -- | |
3 | Test CKT 150 for an open. Was an open found? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair open in CKT 150. Is repair complete? | -- | ||
5 | Repair the open in CKT 1201 between the turn/hazard headlamp switch assembly and the composite headlamp switch assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
