Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure,inspect the fuse(s) for an open. | ||||
1 | Did you perform the remote keyless entry system check? | -- | Go to Step 2 | |
2 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 7 |
3 |
Connect the test light between terminal N and terminal E of the connector. Does the test light illuminate? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair an open in CKT 250 between the remote control door lock receiver connector terminal N and G302. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
5 |
Does the test light illuminate? | -- | Go to Step 8 | Go to Step 6 |
6 | Repair an open in CKT 43 between the connector terminal J and the fuse block. Did you complete the repair? | -- | -- | |
7 | Repair an open in CKT 1733 between the connector terminal E and the multi-function alarm module connector C2 terminal C. Did you complete the repair? | -- | -- | |
8 | Replace the remote control door lock receiver. Refer to Receiver Replacement in Keyless Entry. Did you complete the repair? | -- | -- | |
