Step
| Action
| Value(s)
| Yes
| No
|
|
Important: A short will cause an open fuse(s). Before performing this diagnostic
procedure, inspect the fuse(s) for an open.
|
1
| Did you perform the outside mirrors system check?
| --
| Go to
Step 2
| Go to
Outside Mirrors System Check
|
2
|
- Disconnect the LH outside mirror.
- Move the mirror select switch to the LH position.
- Connect a test light between the mirror connector terminal A
and ground.
- Hold the mirror switch in the DOWN position.
Does the test light illuminate?
| --
| Go to
Step 3
| Go to
Step 6
|
3
|
- Connect the test light between the mirror connector terminal A
and terminal C.
- Hold the mirror switch in the UP position.
- Hold the mirror switch in the DOWN position.
Does the test lamp illuminate in both positions?
| --
| Go to
Step 4
| Go to
Step 6
|
4
|
- Connect the test light between the mirror connector terminal A
and terminal B.
- Hold the mirror switch in the LEFT position.
- Hold the mirror switch in the RIGHT position.
Does the test lamp illuminate in both positions?
| --
| Go to
Step 5
| Go to
Step 6
|
5
|
- Inspect the wiring from the mirror to the switch
- Inspect the connections between the mirror switch and the LH outside
mirror.
Are the wiring and the connections OK?
| --
| Go to
Step 7
| Go to
Step 9
|
6
|
- Inspect the wiring form the mirror to the switch.
- Inspect for a faulty connection between the outside mirror switch
and the LH outside mirror.
Are the wiring and the connections OK?
| --
| Go to
Step 8
| Go to
Step 9
|
7
| Replace the suspect outside mirror motor.
Did you complete the repair?
| --
| Go to
Outside Mirrors System Check
| --
|
8
| Replace the outside mirror switch.
Did you complete the repair?
| --
| Go to
Outside Mirrors System Check
| --
|
9
| Repair the faulty wiring and/or connections. Refer to
Wiring Repairs
or
Connector Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Outside Mirrors System Check
| --
|
