Tools Required

1. Remove the front output bearing using the J 22227-A and the J 41677 and a press.



2. Remove the following in order using the J 22912-01 (inverted) and a press.

2.1.	Output shaft rear bearing

2.2.	3rd/4th gear




3. Remove the following components as an assembly:

•	The key (6)

•	The 2nd gear (2)

•	The needle bearing (1)

•	The 2nd gear inner cone (3)

•	The 2nd gear outer cone (4)

•	The 2nd gear blocking ring (5)




4. Remove the following components as an assembly using J 22912-01 and a press:

Note the orientation of the 1st/2nd/reverse gear synchronizer assembly.

•	The collar

•	The 1st/2nd/reverse gear synchronizer assembly




5. Remove the following components as an assembly:

•	The 1st gear blocking ring (1)

•	The 1st gear outer cone (2)

•	The 1st gear inner cone (3)

•	The 1st gear (4)

•	The 1st gear needle bearing (5)

6. Remove the thrust bearing (6).
7. Remove the thrust bearing washer (7).