Tools Required
|     •  | J 42137  Cam
Orientation Plate Adapter | 
 
Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:
|    •  | Unnecessary SIR system repairs | 
 
In order to avoid the above conditions, observe the following guidelines:
|    •  | Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring. | 
 
|    •  | If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System. | 
 
- Disable the inflatable restraint steering wheel module.
Refer to 
Disabling the SIR System 
 in
SIR.
 
- Remove the inflatable restraint steering wheel module coil. Refer
to 
Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle 
.
 
- Remove and discard the bearing retainer usingJ 23653-SIR 
 and J 42137 
.
 
- Remove the shaft lock (1).
 
- Remove the turn signal cancel cam (2).
 
- Remove the upper bearing spring (3).
 
- Remove the upper bearing spacer (4).