1. Inspect the routing of the cable for a kink, wiring interference or instrument panel interference.
2. Repair the cable as necessary.

Did you find and correct a condition?

System OK

Go to Step 2

1. Disconnect the cable from the air temperature door. Refer to Temperature Control Cable Replacement .
2. Manually cycle the air temperature door.
3. Inspect the door for binding.

Does the door bind?

Go to Step 3

Go to Step 4

1. Inspect the door seals for proper installation.
2. Repair the door seals as necessary.

Did you find and correct a condition?

System OK

Go to Step 7

Inspect the control for binding.

Does the control bind?

Go to Step 5

Go to Step 8

1. Disconnect the cable from the control assembly.
2. Retest the control for binding.

Does the control bind?

Go to Step 6

Go to Step 9

Replace the control. Refer to Heater and Air Conditioning Control Replacement .

Is the repair complete?

System OK

--

1. Inspect the air temperature door for misalignment of the shaft, a bent shaft or valve, and a warped case.
2. Repair the air temperature door as necessary.

Is the repair complete?

System OK

--

1. Reconnect the cable to the air temperature door.
2. Reinspect the clearance of the cable around the instrument panel components.

Is the repair complete?

System OK

--

Replace the cables as necessary. Refer to Temperature Control Cable Replacement .

Is the repair complete?

System OK

--