- Remove the cooling jacket core plugs.
 
| 1.1.  | Use a suitable self-threading screw. | 
 
| 1.2.  | Drill a hole into the cooling jacket plug. | 
 
| 1.3.  | Install the self-threading screw. | 
 
| 1.4.  | Pry out the cooling jacket plug. | 
 
- Remove the cooling jacket drain plug.
 
- Remove the right side oil passage plug.
 
- Remove the oil pressure sender or switch
assembly.
 
- Remove the upper oil passage plug.
 
- Remove the rear oil passage plugs.
 
- Remove the camshaft rear cover and gasket.
 
- Remove the engine front cover alignment pins.
 
- Remove the front oil passage plug and discard.