Checks  | Cause  | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
ECM Torque Related DTC's are set.  | DTC's can cause the engine torque value used by the TCM to become invalid. When the engine torque is invalid, the TCM will command maximum line pressure to protect the transmission.  | ||||||||||
Oil Level  | High or Low; correct as required  | ||||||||||
 
 
  | Stuck  | ||||||||||
Pressure Control Solenoid (312)  | 
 
 
  | ||||||||||
Torque Signal Regulator Valve (309)  | Stuck  | ||||||||||
Transmission Wiring Harness (11)  | 
 
  | ||||||||||
Pressure Switch Assembly  | 
 
  | ||||||||||
Throttle Position Sensor  | 
 
  | ||||||||||
Oil Filter (85)  | Clogged, broken, or loose  | ||||||||||
Oil Filter Seal (84)  | Leaking  | ||||||||||
Cooler Lines  | Clogged or restricted  | ||||||||||
Cooler Line Seals (49)  | Leaking  | ||||||||||
Oil Pump (10)  | Damaged, sticking, porous, or leaking  | ||||||||||
Oil Pump Drive Shaft (19)  | Damaged  | ||||||||||
Pressure Relief Valve (214)  | Damaged spring or missing ball  | ||||||||||
 
 
  | 
 
  |