Turn Signal Cancel Cam and Upper Bearing Inner Race - Disassemble - Off Vehicle Column Shift

Tools Required

1. If the steering column has an inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .

Let the inflatable restraint steering wheel module coil hang freely after removal.

Proceed to step 3.

2. If the steering column does not have an inflatable restraint steering wheel module coil. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .
3. Compress the shaft lock shield assembly usingJ 23653-SIR and J 42137 .



4. Remove the bearing retainer (1) from the shaft.
5. Remove J 23653-SIR and J 42137 .
6. Discard the bearing retainer.
7. Remove the shaft lock shield assembly (2).
8. Remove the turn signal cancel cam assembly (3).
9. Remove the upper bearing spring (4).
10. Remove the upper bearing inner race seat (5).
11. Remove the inner race (6).

Turn Signal Cancel Cam and Upper Bearing Inner Race - Disassemble - Off Vehicle Floor Shift

Tools Required

1. Let the inflatable restraint steering wheel module coil hang freely after removal.
2. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .
3. Compress the shaft lock shield assembly usingJ 23653-SIR and J 42137 .
4. Remove the bearing retainer (1) from the shaft.
5. Remove J 23653-SIR and J 42137 .
6. Discard the bearing retainer.



7. Remove the shaft lock shield assembly (2).
8. Remove the turn signal cancel cam assembly (3).
9. Remove the upper bearing spring (4).
10. Remove the upper bearing inner race seat (5).
11. Remove the inner race (6).