Did you perform the Exterior Lights System Check?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect the connector at the torque converter clutch (TCC)/stoplamp switch.
2. Connect a J 35616-200 between the TCC/stoplamp switch connector, cavity F for CKT 17 (WHT), and ground.
3. Place the ignition switch in the RUN position.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

1. Adjust the TCC/stoplamp switch.
2. Replace the TCC/stoplamp switch, as necessary.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the short to voltage in CKT 17 (WHT) between the TCC/stoplamp switch and the center high-mounted lamps.

Is the repair complete?

--

Go to Exterior Lights System Check

--