Step  | Action  | Value(s)  | Yes  | No  | 
|---|---|---|---|---|
1  | Did you perform the Front Wiper/Washer System Check?  | --  | Go to Step 2  | |
2  | 
 Does the test lamp light?  | --  | Go to Step 4  | Go to Step 3  | 
3  | Repair the open in CKT 143 (YEL) between the windshield wiper washer switch and the I/P fuse block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete?  | --  | --  | |
4  | 
 Does the test lamp light?  | --  | Go to Step 5  | Go to Step 8  | 
5  | 
 Does the test lamp light?  | --  | Go to Step 6  | Go to Step 9  | 
6  | Connect a J 35616-200 between windshield wiper motor module connector cavity B and B+. Does the test lamp light?  | --  | Go to Step 7  | Go to Step 10  | 
7  | Replace the windshield wiper motor module. Refer to Windshield Wiper Motor Replacement . Is the repair complete?  | --  | --  | |
8  | 
 Is the repair complete?  | --  | --  | |
9  | 
 Is the repair complete?  | --  | --  | |
10  | Repair open in CKT 150 (BLK) between windshield wiper motor module and ground. Refer to Wiring Repairs in Wiring Systems. Is the repair complete?  | --  | --  |