DEFINITION: This procedure should only be used if the door lock and unlock functions operate and the courtesy lamps illuminate when a door is open or with the dome lamp switch but do not illuminate with the remote keyless entry transmitter.

Did you perform the Remote Keyless Entry System Check?

--

Go to Step 2

Go to Remote Keyless Entry System Check

1. Disconnect the remote control door lock receiver connector.
2. Close all vehicle doors.
3. Connect a J 39200 DMM between the remote control door lock receiver connector cavity S and ground.

Is battery voltage present?

--

Go to Step 4

Go to Step 3

Repair the open in CKT 156 (WHT) between the remote control door lock receiver and S248. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--

Replace the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement .

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--