Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This procedure should only be used if the door lock/unlock operate with the door lock switches and are inoperative with the remote control door lock transmitter. | ||||
1 | Did you perform the Remote Keyless Entry Diagnostic System Check? | -- | Go to Step 2 | |
2 | Press the power door lock/unlock button twice on the remote keyless entry transmitter. Does the doors lock/unlock operate? | -- | Go to Step 3 | |
3 | Inspect the function with a known good transmitter. Does the doors lock/unlock operate? | -- | Go to Step 4 | Go to Step 5 |
4 | Reprogram the remote keyless transmitter. Is the repair complete? | -- | Go to Step 7 | |
5 |
Is voltage present? | -- | Go to Step 6 | |
6 | Repair the open in CKT 294 (TAN) wire between the remote control door lock receiver connector cavity H and connector C209. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
7 | Replace the remote keyless entry transmitter. Is the repair complete? | -- | -- | |
