Removal Procedure
- Record the lock code before removal (if equipped).
 
- Remove the instrument panel trim bezel. Refer to 
Instrument Panel Cluster Trim Plate Bezel Replacement 
 in Instrument Panel, Gauges and Console.
 
- Push down on the retainers in order to release the radio retainers.
 
- Slide the radio forward in order to remove the radio.
 
- Remove the electrical connectors and the antenna connection.
 
Installation Procedure
- Install the electrical connectors and the antenna connection.
 
- Slide the radio into the instrument panel.
 
- The unit will snap into place when fully seated.
 
- Install the instrument panel trim bezel.  Refer to 
Instrument Panel Cluster Trim Plate Bezel Replacement 
 in Instrument Panel, Gauges and Console.
 
- Verify the component's operation.