Remove the molding from the door.

Important: Apply the molding in an environment free of dust and dirt. Dust and dirt could come in contact with the adhesive backing and prevent proper adhesion.




1. Clean the area where the replacement molding is to be mounted. Use a suitable solvent such as flash naphtha or a mixture of 50 percent isopropyl alcohol and 50 percent water.
2. Dry the area thoroughly.
3. Maintain a temperature range of 27-41°C (80-105°F) in the body area. Heat the area if necessary.
4. Remove the protective liner.
5. Install the molding to the door.