1

1. Turn the ignition to the RUN position.
2. Read the compass display.

Mirror display compass.

Mirror display is blank .

Refer to Automatic Day-Night Mirrors Inoperative .

2

1. Position the vehicle outside away from buildings, antenna towers, etc.
2. Exit the vehicle and with a known good compass, take a reading in which the vehicle is headed.
3. Note the compass reading in mirror display.

Mirror display shows same heading as a known good compass

Mirror display is blank or reads an entirely different heading then known good compass.

Refer to Mirror Compass Display Inoperative or Inaccurate .

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.

1

1. Place the gear selector in park.
2. Turn the ignition switch to the on position.
3. Cover ambient light sensor (windsheild side) with a dark cloth.
4. Shine a light at the headlamp sensor (mirror side).

Mirror gradually darkens.

Refer to Outside Mirrors Automatic Day-Night Feature Inoperative .

2

Place the gear selector in reverse.

Mirror gradually lightens to clear state.

Mirrors - Automatic Day/Night Inoperative in reverse. Refer to Mirrors - Automatic Day-Night Inoperative in Reverse .

3

Place the gear selector in park.

Mirror gradually darkens.

Refer to Outside Mirrors Automatic Day-Night Feature Inoperative .

4

Remove the light and the cloth.

Mirror gradually lightens to clear state.

Refer to Outside Mirrors Automatic Day-Night Feature Inoperative

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.