Removal Procedure
- Remove the power accessory
switch plate. Refer to 
Power Accessory Switch Panel Replacement 
.
 
- Disconnect the power window switch wiring connector.
 
- Remove the screws.
 
- Remove the switch from the switch plate by lifting the rear of
the switch assembly and sliding the switch out from the accessory switch panel.
 
Installation Procedure
- Install the switch to the switch plate sliding the front tabs
in first. Rock the switch down in order to seat the switch completely.
 
- Install the screws.
 
- Connect the wiring connector.
 
- Install the power accessory
switch plate. Refer to 
Power Accessory Switch Panel Replacement 
.