1. Disconnect the left power window/door lock switch connector C1 and C2.
2. Turn the ignition switch to RUN.
3. Using the appropriate probe from the J35616-A connector test adapter kit connect a test lamp between CKT 1001 (DK GRN) connector C2 cavity F and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 2

Locate and repair the open in CKT 1001 (DK GRN) between the left power window/door lock switch and the power window circuit breaker located in the left bussed electrical center (LBEC).

Is the repair complete?

--

System OK

--

1. Ensure the power window switch is in the neutral position.
2. Connect a self powered test lamp between CKT 1850 (BLK) connector C1 cavity M and ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 6

1. Reconnect connectors C1 and C2 to the power window switch.
2. Disconnect the left power window motor connector.
3. Connect a test lamp between cavities A or B to ground.
4. Ensure the ignition is in the RUN position.
5. Operate the switch in the up and the down direction.

Does the test lamp light?

--

Go to Step 5

Go to Step 7

Replace the left power window motor. Refer to Door Window Regulator Replacement .

Is the repair complete?

--

System OK

--

Locate and repair the open in CKT 1850 (BLK) between the left power window/door switch and G203.

Is the repair complete?

--

System OK

--

1. Back probe the left power window switch connector C2 cavities A or M with a test light to ground.
2. Operate the switch in the up and the down direction.

Does the test lamp light?

--

Go to Step 8

Go to Step 9

Locate and repair the open in CKT 164 (DK BLU) or CKT 165 (BRN) respectfully.

Is the repair complete?

--

System OK

--

Replace the left power window/door lock switch. Refer to Power Accessory Switch Panel Replacement .

Is the repair complete?

--

System OK

--