Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Turn ignition switch to RUN.
- Using the appropriate probe from the J35616-A connector test adapter
kit, back probe a test lamp between CKT 1001 (DK GRN) cavity M and ground.
Does the test lamp light?
| --
| Go to
Step 3
| Go to
Step 2
|
2
| Locate and repair the open in CKT 1001 (DK GRN) between the right power
window/door lock switch and the power window circuit breaker located in the
left bussed electrical center (LBEC).
Is the repair complete?
| --
| System OK
| --
|
3
|
- Disconnect the right power window motor connector.
- Connect a test lamp between the right power window motor connector
cavity A and B to ground.
- Operate the right power window switch in the up and the down direction.
Does the test lamp light?
| --
| Go to
Step 4
| Go to
Step 5
|
4
|
- Locate and repair the open in CKT 1050 (BLK) between the right
power window switch and ground.
- If there is no open, replace the right power window motor.
Is the repair complete?
| --
| System OK
| --
|
5
|
- Locate and repair the open in circuits 666 (DK BLU) or 667 (BRN)
between right power window motor and switch.
- If there is no open, replace the right power window switch and
relays. Refer to
Door Lock Switch Replacement
.
Is the repair complete?
| --
| System OK
| --
|
