Step  | Action  | Yes  | No  | |
|---|---|---|---|---|
1  | Inspect for a leaking radiator. Is the radiator leaking?  | Go to Step 2  | Go to Step 3  | |
2  | Repair or install new parts as necessary. Is the repair complete?  | System OK  | --  | |
3  | Inspect for a leaking heater core. Is the heater core leaking?  | Go to Step 2  | Go to Step 4  | |
4  | Inspect for a faulty radiator surge tank cap. Is the cap operating properly?  | Go to Step 5  | Go to Step 2  | |
5  | Inspect for a leaking coolant recovery hose or a cracked surge tank. Is the surge tank or the hose leaking?  | Go to Step 2  | Go to Step 6  | |
6  | Inspect for any loose or damaged hoses or connections. Are any hoses damaged or are any hose connections leaking?  | Go to Step 2  | Go to Step 7  | |
7  | Inspect for a cracked thermostat housing or a leaking thermostat seal. Is the thermostat housing cracked or is there a seal leak?  | Go to Step 2  | Go to Step 8  | |
8  | Inspect for a cracked water pump or a leaking water pump gasket. Is the water pump cracked or is there a leaking gasket?  | Go to Step 2  | Go to Step 9  | |
9  | Inspect for a leaking water pump driveshaft seal. Is the water pump shaft seal leaking?  | Go to Step 10  | Go to Step 11  | |
10  | Replace the water pump. Refer to Water Pump Replacement . Is the repair complete?  | System OK  | Go to Step 11  | |
11  | Inspect for a leaking engine block coolant drain hole plug. Are any drain hole plugs leaking?  | Go to Step 2  | Go to Step 12  | |
12  | Inspect for any leaking cylinder head core plugs. Are the cylinder head core plugs leaking?  | Go to Step 2  | Go to Step 13  | |
13  | Inspect for a leaking cylinder head gasket(s), vent(s) or a cracked cylinder head(s). Is the cylinder head gasket leaking or is the cylinder head cracked?  | Go to Step 2  | Go to Step 14  | |
14  | Inspect for a cracked throttle body or a gasket leak. Is the throttle body cracked or is there a gasket leak?  | Go to Step 2  | Go to Step 15  | |
15  | Inspect for a cracked cylinder block. Is the cylinder block cracked?  | Go to Step 2  | Go to Step 16  | |
16  | Inspect for any porous castings. Are the castings OK?  | System OK  | --  | |