Front Side Door Trim Panel Replacement With YE9

1. Remove the door handle bezel. Refer to Door Inside Handle Bezel Replacement .
2. Remove the door trim panel upper extension. Refer to Upper Extension Trim Panel Replacement .
3. Using a suitable flat bladed tool, gently pry the manual lock lever from the door trim panel.
4. Remove the trim panel screws

•	Remove the screw  (2) from within the opening where the manual door lock lever resides.

•	Remove the screw  (3) from the opening in front of the armrest.

•	Remove the screw located beneath the map pocket, if equipped.

5. Carefully slide the trim panel up in order to release the retainers from the door.
6. Disconnect the electrical connectors.

1. Connect the electrical connectors.
2. Carefully align the trim panel  (1), and slide the trim panel into the retainer slots in order to install the trim panel to the door.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the trim panel screws (2,3).

Tighten
Tighten the screws  (2,3) to 2 N·m (18 lb in).

4. Install the manual lock lever to the trim panel:

•	Align the manual lock lever to the opening in the door trim panel.

•	Push inward until the manual lock lever is fully seated into the trim panel.

5. Install the door trim panel upper extension. Refer to Upper Extension Trim Panel Replacement .
6. Install the door handle bezel. Refer to Door Inside Handle Bezel Replacement .