Removal Procedure
- Remove the overhead console.
Refer to 
Roof Console Replacement 
in
Interior Trim.
 
- Disconnect the microphone (2) connector from the jumper
harness.
 
- Unclip the microphone bracket (1) from the overhead console.
 
- Disconnect the microphone 2-way connector (2) from the
mating 2-way connector.
 
Installation Procedure
- Mount the microphone (1)
to the overhead console at the left rear corner of the overhead console.
 
- Clip the microphone bracket (1) to the overhead console.
 
- Connect the microphone connector (2) to the mating 2-way
connector.
 
- Reinstall the overhead console. Refer to 
Roof Console Replacement 
in Interior Trim.