Battery Indicator Does Not Light
Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Disconnect the Generator connector.
- Move the Ignition Switch to the Run position.
- Connect a fused jumper from BRN (25) wire to ground.
Does the Battery Indicator light?
|
|
Go to Step 4
|
Go to Step 2
|
2
|
- Backprobe I/P Cluster connector with a fused jumper from BRN (25)
wire terminal 19 to ground.
Does the Battery Indicator light?
|
|
Go to Step 5
|
Go to Step 3
|
3
|
- Disconnect the Instrument Cluster connector.
- Measure voltage between Instrument Cluster connector PNK (39)
wire terminal 22 to ground.
Is the voltage reading greater than the value?
| 12 V
|
Go to Step 6
|
Go to Step 7
|
4
| Repair or Replace Generator.
|
|
|
|
5
| Repair open in BRN (25) wire between
Instrument Cluster and Generator.
|
|
|
|
6
| Replace Instrument Cluster.
|
|
|
|
7
| Repair open in PNK (39) wire between
I/P Fuse Block and Instrument Cluster.
|
|
|
|
