Did you perform the Interior Lights System Check?

--

Go to Step 2

Go to Interior Lamps System Check

1. Disconnect the headlamp and panel dimmer switch connector.
2. Place the headlamp and panel dimmer switch in the PARK position.
3. Adjust the headlamp and panel dimmer switch to the parade mode detent position.
4. Connect a self-powered test lamp between cavity H and cavity N of the headlamp and panel dimmer switch connector.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Repair the open in CKT 1382 (WHT) between the headlamp and panel dimmer switch and splice S216. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Interior Lamps System Check

--

Replace the headlamp and panel dimmer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle .

Is the repair complete?

--

Go to Interior Lamps System Check

--