1. Turn the ignition to the ON position.
2. Turn the right turn signal ON.

Does the turn signal function properly?

--

Go to Step 2

Go to Turn Signal Lamps Inoperative - Left or Right Side

1. Connect a scan tool.
2. Using the scan tool, read the right turn signal input in the body control module (BCM).

Does the scan tool show ON?

--

Go to Step 3

Go to Step 6

1. Disconnect the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.
2. Connect a test lamp from terminal B10 to ground.

Does the test lamp light or flash?

--

Go to Step 4

Go to Step 5

1. Inspect the instrument cluster printed circuit and the right turn signal indicator filament.
2. Repair as needed. Refer to Instrument Cluster Bulb Replacement in Instrument Panel, and Gauges and Console.

Did you find and correct the condition?

--

System OK

Go to Step 7

Locate and repair CKT 15 (DK BLU) between the mid bussed electrical center (MBEC) and the instrument cluster.

Is the repair complete?

--

System OK

--

Locate and repair the open in CKT 15 (DK BLU) between the MBEC and the BCM.

If no open is found, replace the BCM. Refer to Body Control Module Replacement in Body Control Systems.

Is the repair complete?

--

Go to Step 3

--

Locate and repair the open to ground in CKT 1850 (BLK).

Is the repair complete?

--

System OK

--