Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting Diagnostic System Check? | Go to Step 2 | |
2 | Verify the fault is present. Does the system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | Go to Step 3 |
3 | Turn the park lamps ON. Do the park lamps function properly? | Go to Step 4 | Go to Park Lamps Inoperative |
4 | Remove the lamp and Inspect the filament. Is the lamp open? | Go to Step 8 | Go to Step 5 |
5 | Connect a test lamp between the park lamp feed circuit and a good ground. Does the test lamp illuminate? | Go to Step 7 | Go to Step 6 |
6 | Repair the open in the park lamp feed circuit between the lamp and the fuse. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
7 | Repair the open in the lamp ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
8 | Replace the lamp. Refer to Parking and Turn Signal Lamp Replacement . Did you complete the replacement? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
