Step  | Action  | Yes  | No  | 
|---|---|---|---|
Schematic Reference:
 
  | |||
1  | Did you perform the Lighting Diagnostic System Check?  | Go to Step 2  | |
2  | Verify the fault is present. Does the system operate normally?  | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems  | Go to Step 3  | 
3  | Open the driver's door. Does the courtesy lamps operate normally?  | Go to Step 4  | |
4  | Are both exterior courtesy (puddle) lamps inoperative?  | Go to Step 5  | |
5  | 
 Does the puddle lamps come on and off with each command?  | Go to Step 12  | Go to Step 6  | 
6  | 
 Does the puddle lamps illuminate?  | Go to Step 13  | Go to Step 7  | 
7  | Inspect for poor connections at connector C1 terminal E3 Did you find and correct the condition?  | Go to Step 15  | Go to Step 8  | 
8  | Inspect the bulb(s). Is the filament(s) open?  | Go to Step 14  | Go to Step 9  | 
9  | Test the exterior courtesy lamp supply circuit for an open and high resistance. Refer to Circuit Testing in Wiring Systems. Did you find the condition?  | Go to Step 10  | Go to Step 11  | 
10  | Repair the open in the exterior courtesy lamp supply circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair?  | Go to Step 15  | --  | 
11  | Repair the open ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair?  | Go to Step 15  | --  | 
12  | Replace the Body Control Module (BCM). Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement?  | Go to Step 15  | --  | 
13  | Replace the puddle lamp relay. Did you complete the replacement?  | Go to Step 15  | --  | 
14  | Replace the lamp(s). Did you complete the replacement?  | Go to Step 15  | --  | 
15  | Operate the system in order to verify the repair. Did you correct the condition?  | System OK  | Go to Step 3  |