Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Wiper/Washer Diagnostic System Check? | -- | ||
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | |
3 |
Does the voltage measure near the specified value? | 9-16 V | ||
4 | Measure voltage between the low windshield washer fluid indicator lamp feed circuit and a good ground. Does the DMM display battery voltage? | 9-16 V | ||
5 |
Did you find the condition? | 9-16 V | ||
6 | Replace the low washer switch. Did you complete the replacement? | -- | -- | |
7 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | -- | |
8 | Repair the open in the low windshield washer fluid indicator lamp feed circuit. Did you complete the repair? | -- | -- | |
9 | Repair the open in the switch ground circuit between the low washer switch and G100. Did you complete the repair? | -- | -- | |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
