Removal Procedure
- Lower the instrument panel storage compartment door by pressing  in the
 tab.
 
- With one hand holding the plunger of the  switch, use a small screw driver to
push in the tabs on each side while pulling outwards.
 
- Pull the switch assembly from the I/P.
 
- Disconnect the electrical connector.
 
- Remove the bulb (1).
 
Installation Procedure
- Install the bulb (1) into the socket.
 
- Connect the electrical connector.
 
- Install the switch until the tabs (1) click in place.
 
- Close the compartment door.