Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This diagnostic procedure should only be used if the liftgate window release operates from the liftgate release switch and is inoperative with the keyless entry transmitter. | ||||
1 | Was the Keyless Entry System Check performed? | -- | Go to Step 2 | |
2 |
Is battery voltage present? | -- | Go to Step 3 | Go to Step 5 |
3 | Connect a DMM, set on ohms, between cavity G and the liftgate release switch cavity D. Is there continuity? | -- | Go to Step 4 | Go to Step 6 |
4 | Replace the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- | |
5 | Repair open in CKT 640 (ORN) between remote control door lock receiver and I/P fuse block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Repair open in CKT 1576 (BLK) between remote control door lock receiver and S165. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
