GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Chevy Suburban - 2WD 🢒 Body and Accessories 🢒 Bumpers 🢒 Rear Bumper Fascia Replacement

Removal Procedure

    Object Number: 316187 Size: SH
  1. Remove the top fascia retainers.
  2. Disconnect the license plate lamp harness.
  3. Raise and support the vehicle with suitable safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Remove the push-pin retainers from the underside of the fascia.
  5. Remove the fascia from the impact bar.

Installation Procedure
  1. Align the locator pin of the fascia to the hole in the impact bar.

    2. Object Number: 316187 Size: SH
  2. Press the push-pin retainers into the underside of the fascia.
  3. Remove the safety stands, and lower the vehicle.
  4. Connect the license plate lamp harness.
  5. Install the top fascia retainers.