Cause 
 | Correction 
 | 
Low oil pressure 
 | 
|     •  | Repair or replace as required. |  
  
 | 
Detonation or spark knock 
 | Verify the correct operation of the ignition controls. Refer to 
Detonation/Spark Knock
 in Engine Controls - 8.1L. 
 | 
Loose torque converter bolts or improperly installed torque converter 
 | 
|     •  | Inspect the torque converter bolts and flywheel. |  
  
|     •  | Verify correct installation of the torque converter. |  
  
 | 
Cracked flywheel 
 | 
|     •  | Inspect the flywheel bolts and flywheel. |  
  
 | 
Excessive connecting rod bearing clearance 
 | Inspect the following components, and repair as required: 
|     •  | The connecting rod bearings |  
  
 | 
Excessive crankshaft bearing clearance 
 | Inspect the following components, and repair as required: 
|     •  | The crankshaft bearings |  
  
|     •  | The crankshaft journals |  
  
|     •  | The cylinder block crankshaft bearing bore |  
  
 |