Knee Bolster Replacement. Chevrolet Chevy Suburban - 2WD 2007

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Chevy Suburban - 2WD 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Knee Bolster Replacement

Knee Bolster Replacement Cadillac

Object Number: 1702496 Size: MF

Callout	Component Name
Preliminary Procedures Remove the park brake release handle. Refer to Parking Brake Release Handle Assembly Replacement.
1	Left Outer Trim Cover Tip Refer to Instrument Panel Outer Trim Cover Replacement.
2	Knee Bolster Assembly Screws (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
3	Knee Bolster Assembly Procedure Disconnect the electrical connections. If applicable. When replacing the knee bolster assembly, transfer all necessary components.
4	Retainer Clips (Qty: 4)

Knee Bolster Replacement Except Cadillac

Object Number: 1682666 Size: MF

Callout	Component Name
Preliminary Procedures Remove the left instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement. Remove the park brake release handle. Refer to Parking Brake Release Handle Assembly Replacement.
1	Knee Bolster Assembly Screws (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Knee Bolster Assembly Procedure Disconnect the electrical connections. If applicable. When replacing the knee bolster assembly, transfer all necessary components.
3	Retainer Clips (Qty: 4)