Rear Seat Back Cushion Cover and Pad Replacement. Chevrolet Chevy Suburban - 2WD 2007

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Chevy Suburban - 2WD 🢒 Preface 🢒 Cautions and Notices 🢒 Rear Seat Back Cushion Cover and Pad Replacement

Rear Seat Back Cushion Cover and Pad Replacement Tahoe/Yukon/Escalade with Bucket

Object Number: 1684818 Size: MF

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement .
1	Rear Seat Head Restraint Procedure Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
2	Rear Seat Head Restraint Guides Procedure Squeeze the bottom of the head restraint guide together and push up to remove.
3	Rear Seat Armrest Refer to Rear Seat Armrest Replacement .
4	Rear Seat Back Cushion Cover Procedure Disconnect the seat back cushion cover j-channel from the seat cushion frame. Disconnect the electrical connector if equipped with heated seat. Pull the seat back cushion cover away from the seat cushion pad to disengage the retaining channel.
5	Rear Seat Back Cushion Pad

Rear Seat Back Cushion Cover and Pad Replacement Tahoe/Yukon/Escalade with Split Bench

Object Number: 1685292 Size: MF

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement .
1	Rear Seat Head Restraint Procedure Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
2	Rear Seat Head Restraint Guides Procedure Squeeze the bottom of the head restraint guide together and push up to remove.
3	Rear Seat Back Cushion Cover Procedure Disconnect the seat back cushion cover j-channel from the seat cushion frame. Disconnect the electrical connector if equipped with heated seat. Pull the seat back cushion cover away from the seat cushion pad to disengage the retaining channel.
4	Rear Seat Back Cushion Pad

Rear Seat Back Cushion Cover and Pad Replacement Avalanche/Escalade EXT

Object Number: 1708141 Size: MF

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement .
1	Rear Seat Back Trim Panel Refer to Rear Seat Back Cushion Trim Panel Replacement .
2	Rear Seat Head Restraint Tip Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
3	Rear Seat Head Restraint Guides Tip Squeeze the bottom of the head restraint guide together and push up to remove.
4	Rear Seat Shoulder Belt Opening Bezel Refer to Rear Seat Shoulder Belt Opening Bezel Replacement .
5	Rear Seat Back Cushion Cover Use a sharp bladed tool to carefully release the seat back cushion pad from the seat back cushion frame, the pad is glued to the perimeter of the frame. Remove the seat back cushion cover and pad as an assembly then separate as necessary.
6	Rear Seat Back Cushion Pad