Tools Required

1. Remove the valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement .
2. Remove the valve rocker arms. Refer to Valve Rocker Arm and Push Rod Replacement .
3. Remove the spark plugs. Refer to Spark Plugs Replacement in Engine Electrical.



4. Remove the valve keepers as follows:

4.1.	Install the J 23590 into the spark plug hole.

4.2.	Apply compressed air in order to hold the valves in place.

4.3.	Install the valve rocker arm bolt.

4.4.	Use the J 5892-C to compress the valve spring.

4.5.	Remove the valve keepers.

Important: Do not release the compressed air from the cylinder. The valve will fall into the cylinder and may cause damage.

4.6.	Carefully release the spring tension. Remove the J 5892-C .

5. Remove the cap and the spring.
6. Remove the valve stem oil seal.

Tools Required

1. Install the valve stem oil seal.
2. Install the spring with the damper.
3. Install the cap.



4. Install the valve keepers as follows:

4.1.	With compressed air still applied, compress the valve spring with the J 5892-C .

4.2.	Install the valve keepers. Apply grease to hold the valve keepers in place.

4.3.	Carefully release the spring tension. Make sure the valve keepers do not move. Remove the J 5892-C .

4.4.	Release compressed air from the cylinder.

4.5.	Remove J 23590 .

5. Install the spark plugs. Refer to Spark Plugs Replacement in Engine Electrical.
6. Remove the valve rocker arms. Refer to Valve Rocker Arm and Push Rod Replacement .
7. Remove the valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement .