Removal Procedure
- Loosen the clamp (3)
on   the air duct (2) at the throttle body.
 
- Disconnect the electrical connector from the mass air flow/intake
air temperature (MAF/IAT) sensor  (4).
 
- Loosen the 4 fasteners (8) securing the air cleaner housing top
cover (4).
 
- Lift and rotate the top cover (4) of the air cleaner housing
to   gain access to the air filter element. 
 
- Lift out the air filter element (5).
 
- Inspect the air filter element for the following:
 
- Clean   or replace the air filter element if required.
 
Installation Procedure
- Install the air filter element (5) into the air cleaner housing.
 
- Rotate and install the top cover (4) to the air cleaner
  housing (6).
 
- Insert the fasteners (8) to secure the top cover.
 
- Connect the MAF/IAT (4)
  electrical connector.
 
- Tighten the clamp (3) on the air duct (2) at the
throttle body.