Removal Procedure
- Remove the I/P
top pad. Refer to 
Instrument Panel Upper Trim Panel Replacement 
 in Instrument Panel, Gages and Console.
 
- Remove the radio. Refer to 
Radio Replacement 
 in Entertainment.
 
- Remove the GPS antenna screw (1).
 
Important: Observe the routing of the GPS antenna cable
to ensure the GPS antenna cable is routed properly during installation.
- Remove the GPS cable from the I/P structure.
 
- Remove the GPS antenna (2) from the vehicle.
 
Installation Procedure
- Install the GPS
antenna (2) to the I/P bracket.
 
- Route the GPS antenna cable to the radio opening, as noted in the removal
procedure.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the screw (1).
 
Tighten
Tighten the screw (1) to 2 N·m
(18 lb in).
- Install the radio. Refer to 
Radio Replacement 
 in Entertainment.
 
- Install the I/P top pad. Refer to 
Instrument Panel Upper Trim Panel Replacement 
 in Instrument Panel, Gages
and Console.